Spraybond X50 EPS/XPS

« обзор
Spraybond X50 EPS/XPS
Product description
Zettex Spraybond X50 is a very high quality contact adhesive without solvents or plasticisers for gluing all types of EPS, XPS and PU.

Material
SBR Rubber

Properties
  • Very fast
  • Solvent free
  • Extremely powerful
  • Fast drying
  • For universal use
  • Ready to use
  • DCM Free
Available forms
  • Pressurised cylinder 18 kg
  • Aerosol 500 ml. 

Colour
Transparent/red/blue
Areas of application
For the fast and effective adhesion of all solvent-sensitive surfaces such as EPS, XPS and PU. 
The adhesive is completely non-corrosive. If using on a roof, it is important to check whether the adhesive is sufficiently heat resistant for the intended purpose.

Instructions
Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive onto both surfaces being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply the glue in a single layer. Bring the surfaces together after 4-6 minutes and press or roller firmly. Wait at least twice as long to glue the surfaces together if the layers applied have overlapped. Check thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous. Apply an extra layer, if necessary. 

Surface
All surfaces should be dry and free from grease and dust

Особенности спецификация
Processing temperature +5 to +40 degrees
Temperature resistance -40 to +80°C
Consumption 70-80 Gramm/m2
Open time 4-6 min
Maximum yield 150 m2
Solids 30 %
Color Amber
Spray pattern Web
VOC 544 g/l
Download MSDS fileDownload TDS file задайте вопрос

задайте вопрос

перезвоните мне

перезвоните мне