Zettex Superlube Hexaflon is spray designed to deposit a dry film, low friction surface, effective over a wide service temperature range. The Superlube is resistant against temperatures between -40 ℃ and 220 ℃ .
• Extremely fast drying
• Outstanding chemical resistance.
• Outstanding light resistance
• Exceptional thermal stability
• Non-grease dry film does not attract airborne dirt and grit.
• Lowest coefficient of friction of all lubricants.
• Aerosol 500 ml.
Zettex Superlube is suitable for all substrates including wood, metals, rubbers and plastics, and is particularly beneficial in the assembly/disassembly of pre-treated components. Please don’t use it on any surface where application of a slippery film may create a health hazard.
Shake can thoroughly before use. Hold upright, and spray from a distance of 15 to 30cm. Take care to avoid overspray, especially on floors.
|| An opaque, non-homogeneous milky liquid
|| Not applicable
|| 0.700 +/- 0.15 at 20 degrees
|Flammability, as supplied
|| Extremely flammable, flash point below -20
|| A dispersion of PTFE in isopropanol, and naphtha [petroleum], hydrotreated, light, in a butane/isobutane/propane propellant.
|Non Volatiles % m/m
|Service temperature (Continuous)
|| Up to 250 ℃
|Active content % m/m , as supplied
|| Free flowing liquid
|Service temperature (Intermittent)
|| Up to 300 ℃